SEAMAX SUP 20PSI Intelligent Double Stage Electric Air Pump for Inflatable Boat and Stand Up Paddle Board, Fully Support Inflation and Deflation

SEAMAX SUP 20PSI Intelligent Double Stage Electric Air Pump for Inflatable Boat and Stand Up Paddle Board, Fully Support Inflation and Deflation
SEAMAX SUP 20PSI Intelligent Double Stage Electric Air Pump for Inflatable Boat and Stand Up Paddle Board, Fully Support Inflation and Deflation

  • Seamax SUP20D air pump is an upgraded version from SUP20S; Programmed intelligent digital controller for dual stage inflation and LCD display. Major parts made of marine grade engineered ABS and Nylon material for durability. Low power consumption, 5-10A (60-120W). Wide range of working temperature and humidity. Regardless daily use during the season or occasionally use in a year, this high quality air pump can always do a good job.
  • 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Real time pressure monitoring and auto stop once selected pressure reached; High efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 – 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); accurateness 0.01 PSI.
  • Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduce and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddle board; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
  • Super light weight 4Lbs and Dimension only 10″x7″x7″ with easy carry handle; Reinforced 4ft air hose. Perfect handy size for pumping boats, SUPs and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect air tight.
  • The pump’s 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website. Seller 2 years warranty coverage within USA & Canada. Customer 100% satisfied guarantee!

SUP20D Description

Easy to use touch button on carry handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord and 3.5ft nylon air hose, Universal HR air valve adaptor and 3 different size O-Rings to fit most inflatable SUP. Noise reduction inflators for quiet operation.

Intelligent 12V DC electric pump comes with digital control, LCD pressure display. The pump can auto stop at pre-set pressure, or 20 minutes continuously working time reached.

Suitable for inflatable boats and SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves, that they have a turning pin or pressing down pin at the middle to control the valve’s Open & Closed position. Pick a best size silicon O-Rings to keep the connection best air tight.

If more than 1 SUP use at the same time, Please fast cool down the pump by running in the air for 1 minute between each use. Pump is designed to use it in tropical area such as Florida. Specification

– Model: Seamax SUP20D
– Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar)
– Digital Sensor Accuracy: 0.01 PSI
– Controller Method: Pre-programmed digital controller board
– Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage
– Pump Stage 1: Sealed & Quiet turbo fan for high volume inflation
– Pump Stage 2: Engineered cylinder type compressor for high pressure
– Dual Inflators Switch Point: 0.65 PSI
– O Ring Thickness: 0.3mm / 0.5mm / 0.6mm
– Sand Filter: Built-in filters for air intake
– Pump Working Voltage: 11-14V DC
– Max Energy Consumption: 10A, 120W (12V)
– DC Power Cord Length: 9ft (2.75m)
– Air Hose: 3.5ft Length & with HR Valve Adaptors
– Product Net Weight: 3.6 Lbs
– Limited Warranty: 2 Years within USA & Canada

Optional
– Version 2 air hose kit for Seamax SUP Electric Pump
– Leafield C7 air valve adaptor



Fuyang 30°N 1 Piece IDBF Approved Two-Sided Colorful Pattern Lightweight Carbon Fiber Dragon Boat Paddle
Fuyang 30°N 1 Piece IDBF Approved Two-Sided Colorful Pattern Lightweight Carbon Fiber Dragon Boat Paddle

  • MATERIAL: Carbon Fiber. Paddle Grip: GZ. Weight:12.0-13.4ozs/340-380g.
  • CNC CUTTING: Computerized Numerical Control Cutting PVC Foam for the Best Accuracy.
  • PVC FOAM CORE BLADE: Guarantee the stiffness and strength of the dragon boat paddle.
  • IDBF APPROVED: IDBF No: 3581. 3K Carbon Fiber Dragon Boat Paddle. Lightweight for Racing. Special design Two-Sided Pattern. Flat Blade is suitable for big competition.
  • BEST QUALITY: Fuyang 30°N Dragon Boat Paddle is Made by Hand Lay-Up, shaped by CNC machine, One-Step foaming technology. Any question, please feel free to contact us.

Dragon Boat Paddle Length:
47.0inches/120cm
48.0inches/123cm
49.0inches/125cm
Blade Size:
18.9*7.1inchs/48*18cm

Material: Carbon Fiber, PVC foam, Epoxy Resin
Paddle Grip: GZ
Weight: 12.0-13.4ozs/340-380g

-CNC Cutting: Computerized Numerical Control Cutting PVC Foam for the Best Accuracy
-PVC Foam Core Blade: Guarantee the stiffness and strength of the dragon boat paddle
-Fuyang 30°N Dragon Boat Paddle is Made by Hand Lay-Up, shaped by CNC machine, One-Step foaming technology
-IDBF Approved Dragon Boat Paddle. 3K Carbon Fiber. Lightweight for Racing. Special design Two-Sided Pattern. Flat Blade is suitable for big competition



Leave a Reply